Solar and battery systems

Installation and system enquiry

Use this form for non-rebate solar and battery systems, off-grid projects, Deye and Victron based systems, equipment supply, or projects where you already have an electrician.

Deye hybrid systems LIFEPO4 16 kWh stack batteries Victron and Pylontech options Off-grid support

Before you start

Photos are the fastest way for us to understand the job. If you are not sure which system is right, choose the closest options and we will help narrow it down.

Solar and Battery System Installation Form

Customer and property details

This gives us the basic contact and installation address details we need before assessing the system.

System interest and goals

Tell us what you are considering. It is fine if you are not sure yet.

Existing solar and battery

These answers help us work out compatibility, upgrade paths, and whether extra equipment may be needed.

Electrical and site details

These details help us prepare a cleaner quote and avoid installation surprises.

Battery location and photos

Photos are the most useful part of this form. They help us check practical battery location, switchboard space, access, cable route, and likely extra works.

Quick location guide

Good locations: garage, utility area, shaded external wall, or another solid wall close to the switchboard/inverter.

Avoid where possible: bedrooms, living areas, direct sun, gas bottles, hot-water units, AC condensers, taps/hoses, tight walkways, and areas with poor access.

Final compliance: the installer will confirm the final location against the relevant Australian standards and product requirements.

Photos to upload

  • Switchboard close-up with the door open and breakers visible.
  • Switchboard wide shot showing the surrounding wall/area.
  • Existing inverter and solar equipment if installed.
  • Preferred battery location from close-up and 3-5 m back.
  • Access path from driveway/gate to the work area.
  • Other side of the proposed battery wall if accessible.
X