Description
Premium energy storage, carefully fitted to your home.
The entry package combines a 10kW single-phase Sigen Energy Controller with two BAT 10.0 modules: 18.08kWh nominal and 17.52kWh usable storage, assessed and commissioned by our own installation team.
Save approximately $3,193 against current standalone component prices plus standard installation.
Ready to buy? Have your postcode, supply phase and preferred battery size handy and speak directly with our team.
Clear starting price: $11,990 applies to the exact 10kW single-phase, two-module entry configuration with a suitable standard on-grid installation and assignment of the applicable federal battery incentive. We confirm the final written scope after reviewing the property, switchboard, access and location.
Capacity clarity: SigenStor BAT 10.0 is the model name. Each module provides 9.04kWh nominal and 8.76kWh usable capacity at beginning of life under manufacturer test conditions. This listing always shows both figures.
Choose the configuration that fits
| Modules | Nominal capacity | Usable capacity | Indicative installed price* | Good starting point for |
|---|---|---|---|---|
| 2 × BAT 10.0 | 18.08kWh | 17.52kWh | From $11,990 | Efficient homes and selected backup circuits |
| 3 × BAT 10.0 | 27.12kWh | 26.28kWh | From $14,990 | Medium homes wanting stronger overnight coverage |
| 4 × BAT 10.0 | 36.16kWh | 35.04kWh | From $17,990 | Larger homes and longer backup runtime |
| 5 × BAT 10.0 | 45.20kWh | 43.80kWh | From $20,990 | High-use homes, EV planning and larger three-phase loads |
| 6 × BAT 10.0 | 54.24kWh | 52.56kWh | From $23,990 | Large residential and carefully assessed high-demand sites |
*Indicative prices retain the 10kW single-phase entry controller and the same suitable standard on-grid installation assumptions. Each BAT 10.0 above the first two adds approximately $3,000. Gateway, off-grid work, another controller and site-specific extras are additional and confirmed in writing.
Plan a larger SigenStor system
The $11,990 starting product is one exact simple bundle: a 10kW single-phase Energy Controller with 2 × BAT 10.0 modules, providing 18.08kWh nominal / 17.52kWh usable storage. With the same controller and standard on-grid scope, allow approximately $3,000 for each additional BAT 10.0 module, up to the full six-module tower. Use the sizing assistant below to tell us if you prefer a larger battery, another controller, Gateway backup or EV DC charging. It records an enquiry preference only—it does not alter the cart price. The final written quote confirms the property and installation scope.
What would you like us to assess?
Select the system you are considering, then send it straight to our installation team with your name, phone number and email. Gateway, another controller, off-grid work and site-specific extras are confirmed after we review the property.
Get a quick recommendation
If you are ready to proceed once suitability and the written site scope are confirmed, send your selection below. Only your name, phone number, email and a readiness acknowledgement are required.
We use these details only to respond to this enquiry. Obvious placeholder and disposable contact details are rejected.
Prefer to talk now? Call 07 4191 6815 with your postcode, supply phase and preferred module count.
Controller, Gateway and EV charging
The family page can assess the SigenStor EC 10.0 SP and 12.0 SP single-phase controllers, plus the EC 25.0 TP three-phase controller. The correct choice depends on supply phase, existing solar, network limits, backup expectations and the loads you want the system to carry.
Included in the $11,990 starting package
- 2 × SigenStor BAT 10.0 modules
- 10kW single-phase Sigen Energy Controller
- Ground-mounting kit for the entry tower
- Suitable standard on-grid installation within our normal service corridor
- Commissioning, documentation and customer handover by our own friendly team
Assessed and priced to suit the site
- Additional BAT 10.0 modules at approximately $3,000 each, up to six in the tower
- Gateway and essential/whole-home blackout backup
- Current 12.5kW Sigen EV DC module and 25kW option eligibility
- Switchboard upgrades, long cable routes, trenching or complex access
- Travel, freight and long-distance warranty support outside the standard area
Why SigenStor is different
Software-led energy control
The integrated energy-management system and mySigen app bring live energy flows, operating modes, forecasting and AI-assisted optimisation into one connected platform. For many buyers, this polished software ecosystem is one of SigenStor’s strongest advantages.
Long-life 314Ah cells
Sigenergy states a 10,000-cycle cell-life figure for the BAT 10.0 under specified laboratory conditions to 60% state of health. That is a standout published cell specification, although cycle figures between brands are not always measured on identical terms.
Built for the EV transition
The optional 12.5kW or 25kW Sigen EV DC module is designed for direct solar charging and bidirectional V2H/V2G use. Actual bidirectional operation depends on the vehicle, local approvals, standards, firmware and Sigenergy’s supported-model list.
Why customers choose LiFePO4 Australia
Care before the sale
We review phase, solar, switchboard, access and the intended battery location before promising a final scope.
Workmanship over shortcuts
Our installation team commissions the system carefully, explains how it works and documents genuine scope changes clearly.
Support after installation
You have a practical Australian contact for system questions, warranty coordination and future expansion—not just a box delivered to the driveway.
Backup without vague promises
A battery connected to the grid is not automatically a blackout-backup system. Backup normally requires the suitable Sigen Gateway, safe grid isolation, nominated circuits or whole-home load assessment, and any necessary switchboard work. We check that through the detailed photo assessment before confirming scope and price.
Planning a true off-grid installation?
Allow from approximately $2,500 additional for the extra off-grid design and installation work above the comparable on-grid package. The suitable Sigen Gateway, freight, travel and any site-specific electrical or civil work are additional. A true off-grid system must be designed around your peak loads, daily energy use, solar resource, autonomy target and generator strategy—it is not simply the on-grid package with a switch changed.
Off-grid engineering and commissioning
- Load profile, surge demand and required days of autonomy
- Controller, battery, solar-array and string design
- Generator sizing, auto-start logic and energy-source priorities where required
- Protection, earthing, backup circuits, black-start and recovery testing
- Commissioning, monitoring setup, documentation and customer handover
Common additional project costs
- The correct single-phase or three-phase Sigen Gateway and associated hardware
- Switchboard alterations, changeover/protection equipment and cable upgrades
- Freight, lifting, difficult access, trenching and long cable routes
- Installer travel, accommodation and realistic remote warranty-support allowance
- Extra solar, generator integration, communications or future EV DC charging
Where we install
Our standard on-grid installation corridor covers Gold Coast, Greater Brisbane, Sunshine Coast, Gympie, Maryborough, Hervey Bay and Bundaberg, plus approximately 100km west. We can often help further out, but we prepare a fresh quote that includes travel, remote logistics and a realistic allowance for long-distance warranty or return visits.
Technical specifications
| Entry controller | SigenStor EC 10.0 SP AU updated model; 9,999W nominal on-grid output; 4 MPPT |
|---|---|
| Battery model | SigenStor BAT 10.0 |
| Chemistry / cell capacity | LiFePOâ‚„ / 314Ah |
| Manufacturer cell-life figure | 10,000 cycles under the manufacturer’s stated test conditions: 25±2°C, 0.5C charge/discharge rate and 60% state of health endpoint |
| Energy per module | 9.04kWh nominal / 8.76kWh usable |
| Entry capacity | 18.08kWh nominal / 17.52kWh usable |
| Maximum charge/discharge power | 4.6kW per BAT 10.0 module |
| 10-second peak | 6.9kW per BAT 10.0 module |
| Module dimensions / weight | 767 × 270 × 265mm / approximately 78kg |
| Cooling / ingress protection | Natural convection / IP66 |
| Installation method | Floor-standing or wall-mounted, subject to approved site design |
| Software and monitoring | Integrated EMS with mySigen app for live energy flows, configurable operating modes, forecasting and AI-assisted optimisation |
| EV DC supply option | Optional 12.5kW or 25kW bidirectional DC charging module; CCS2; vehicle compatibility, approvals, firmware and supported functions must be confirmed |
| Warranty | Sigenergy 10-year limited product/performance warranty; capacity, throughput, commissioning and operating terms apply |
Starting-price conditions: the advertised $11,990 entry offer and the $3,000-per-added-module guide assume an eligible on-grid property, the 10kW single-phase entry controller, suitable existing electrical infrastructure, straightforward access and cable route, and assignment of the applicable federal battery incentive. Gateway or off-grid equipment, the additional off-grid design/installation allowance, switchboard upgrades, freight, extended cable runs, difficult access, travel and other non-standard work are confirmed in the written quote after assessment.
Send the site information and photos
The quick enquiry above is the fastest way to start. If you already have switchboard, meter, solar-equipment and proposed-location photos ready, continue to the detailed technical assessment.
Frequently asked questions
Is BAT 10.0 a full 10kWh usable?
No. It is 9.04kWh nominal and 8.76kWh usable per module.
How much does another battery add?
For this 10kW single-phase package, allow approximately $3,000 for each BAT 10.0 above the first two, up to six modules. The final quote still checks stock, incentive eligibility and the installation scope.
What should I budget for off-grid?
Allow from approximately $2,500 additional for the extra design and installation work, then add the suitable Gateway, freight, travel and any site-specific electrical, civil, solar or generator work.
Can the system be expanded later?
SigenStor is modular, but any later expansion must be checked against controller/module limits, space, firmware, warranty and installation requirements.
Can the EV charger power the home?
The optional Sigen EV DC module is designed for bidirectional V2H/V2G operation, but the actual functions depend on a compatible vehicle, local approvals, standards, firmware and Sigenergy’s supported-model list. Not every EV or plug-in hybrid supports bidirectional charging.
Does it run the whole home in a blackout?
Only when the suitable Gateway, protection and backup design have been assessed and installed. Large loads and three-phase sites need particular care.
Who installs it?
Our own helpful installation team handles the project within our service area, explains non-standard scope clearly and remains your practical contact through assessment and installation.
