Description
Sigenergy · EV charging hardware
Sigenergy SigenStor EV DC 12.5kW Charging Module with 10m Cable
A carefully specified EV charging product, supplied with clear compatibility guidance and practical Australian support.
Model SigenStor EVDC12 10S2U
This is a SigenStor system module, not a standalone wall charger. We confirm the SigenStor configuration, vehicle interface, installation scope and current approval position before quoting.
Supply & phase
Integrated SigenStor system component. The electrician confirms available capacity, circuit protection and any load-management requirements.
Cable & vehicle
Tethered, 10m. Connector: CCS2; vehicle compatibility must be confirmed. The vehicle’s onboard charger sets the final AC charging limit.
Connectivity
Managed through the compatible Sigenergy system. Network coverage, commissioning and platform requirements are checked for the intended installation.
Solar charging
Direct solar/battery DC charging within a compatible SigenStor configuration
Included
- The specified EV DC module and tethered cable
- Configuration review before supply
- LiFePO4 Australia technical and warranty coordination
Required separately or site-dependent
- Compatible SigenStor equipment and system capacity
- Electrical and communications work
- Commissioning, protection equipment and any site upgrades
Why LiFePO4 Australia
Help before the box leaves—and after it arrives.
Compatibility first
We help identify the right phase, connector, cable arrangement and system dependencies before supply.
Installation clarity
Hardware and electrical installation are kept distinct, with an installation-help path for fixed chargers.
Australian support
You have a practical contact for order questions, documentation and manufacturer warranty coordination.
Technical specifications
| Manufacturer | Sigenergy |
|---|---|
| Manufacturer part number | SigenStor EVDC12 10S2U |
| Charging power | 12.5kW DC |
| Electrical supply | Integrated SigenStor system component |
| Connector | CCS2; vehicle compatibility must be confirmed |
| Cable arrangement | Tethered, 10m |
| Connectivity | Managed through the compatible Sigenergy system |
| Solar integration | Direct solar/battery DC charging within a compatible SigenStor configuration |
| Enclosure / protection | Refer to official datasheet |
| Dimensions | Refer to official datasheet |
| Weight | Refer to official datasheet |
| Warranty | Refer to current Sigenergy Australian warranty terms |
Specifications are model-specific and based on current manufacturer documentation. Where a requirement depends on the installation, we confirm it before supply.
Fixed EV charging equipment must be selected, installed, protected, tested and commissioned by a suitably licensed electrician in accordance with the manufacturer instructions and applicable Australian requirements. Site supply, earthing, protection, load management and network settings are installation-specific.
Configured sale
Request a site-specific quote
Tell us about the property and the charging outcome you need. We’ll use model SigenStor EVDC12 10S2U so the conversation starts with the exact product.
Frequently asked questions
Will this charger work with my EV?
Confirm the connector type and your vehicle’s onboard AC or DC charging capability. For this model the stated interface is CCS2; vehicle compatibility must be confirmed. We can help check the exact vehicle before supply.
Will I receive the full advertised charging power?
The stated maximum is 12.5kW DC. Actual power is limited by the vehicle, available phase and site capacity, the dedicated circuit and commissioning settings.
Can it charge from rooftop solar?
Direct solar/battery DC charging within a compatible SigenStor configuration Any required meter, current transformers, gateway or compatible energy platform is confirmed as part of system design.
Is installation included in the hardware price?
No. This listing is for hardware unless a written quote explicitly includes installation. Fixed chargers require a suitably licensed electrician; use the installation-help button for a site-specific path.
