Description
Sigenergy · EV charging hardware
Sigenergy Sigen EV AC 7kW Charger with 5m Type 2 Cable
A carefully specified EV charging product, supplied with clear compatibility guidance and practical Australian support.
Model Sigen EVAC 7 4G T2-WH
Charging power is limited by the site supply, circuit design and the vehicle’s onboard AC charger. A 22kW wallbox will not make a vehicle accept more than its own maximum AC charge rate.
Supply & phase
Single-phase. The electrician confirms available capacity, circuit protection and any load-management requirements.
Cable & vehicle
Tethered, 5m. Connector: Type 2. The vehicle’s onboard charger sets the final AC charging limit.
Connectivity
4G, Wi-Fi and Ethernet. Network coverage, commissioning and platform requirements are checked for the intended installation.
Solar charging
Smart solar charging when configured within a compatible Sigenergy system
Included
- The charger hardware for this exact model
- The cable arrangement stated above
- LiFePO4 Australia pre-sale and warranty coordination
Required separately or site-dependent
- Installation by a suitably licensed electrician
- Circuit protection, cabling and switchboard work unless quoted
- Meters, CTs, gateways, subscriptions or pedestals unless explicitly stated
Why LiFePO4 Australia
Help before the box leaves—and after it arrives.
Compatibility first
We help identify the right phase, connector, cable arrangement and system dependencies before supply.
Installation clarity
Hardware and electrical installation are kept distinct, with an installation-help path for fixed chargers.
Australian support
You have a practical contact for order questions, documentation and manufacturer warranty coordination.
Technical specifications
| Manufacturer | Sigenergy |
|---|---|
| Manufacturer part number | Sigen EVAC 7 4G T2-WH |
| Charging power | 7kW |
| Electrical supply | Single-phase |
| Connector | Type 2 |
| Cable arrangement | Tethered, 5m |
| Connectivity | 4G, Wi-Fi and Ethernet |
| Solar integration | Smart solar charging when configured within a compatible Sigenergy system |
| Enclosure / protection | IP65 |
| Dimensions | 384 u00d7 234 u00d7 126mm (H u00d7 L u00d7 W) |
| Weight | 4.5kg |
| Warranty | 3 years |
Specifications are model-specific and based on current manufacturer documentation. Where a requirement depends on the installation, we confirm it before supply.
Fixed EV charging equipment must be selected, installed, protected, tested and commissioned by a suitably licensed electrician in accordance with the manufacturer instructions and applicable Australian requirements. Site supply, earthing, protection, load management and network settings are installation-specific.
Need a hand before ordering?
Ask about installation
Available to order with live stock validation. We’ll use model Sigen EVAC 7 4G T2-WH so the conversation starts with the exact product.
Frequently asked questions
Will this charger work with my EV?
Confirm the connector type and your vehicle’s onboard AC or DC charging capability. For this model the stated interface is Type 2. We can help check the exact vehicle before supply.
Will I receive the full advertised charging power?
The stated maximum is 7kW. Actual power is limited by the vehicle, available phase and site capacity, the dedicated circuit and commissioning settings.
Can it charge from rooftop solar?
Smart solar charging when configured within a compatible Sigenergy system Any required meter, current transformers, gateway or compatible energy platform is confirmed as part of system design.
Is installation included in the hardware price?
No. This listing is for hardware unless a written quote explicitly includes installation. Fixed chargers require a suitably licensed electrician; use the installation-help button for a site-specific path.
