48V EVE LF334 334Ah LiFePO4 Battery Kit ~17.2kWh with JK BMS

Build a substantial 51.52V, 334Ah battery with 16 matched genuine EVE LF334 cells and a JK 200A inverter BMS. The DIY component kit provides approximately 17.21kWh nominal energy.

SKU: KIT-EVE-LF334-16S-JKPB200 Category: Tags: , , , , , Brand:

Description

Build your own 51.52V, 334Ah LiFePO4 battery using matched genuine EVE LF334 prismatic cells and a correctly selected JK BMS.

The 16S1P configuration provides approximately 17.21kWh nominal energy for substantial off-grid solar, residential backup and workshop energy-storage projects.

Genuine EVE cells

Each EVE LF334 cell is rated at 3.22V, 334Ah and 1075.48Wh nominal energy. EVE specifies 4,000 cycles to 80% SOH at 25°C under EVE specified test conditions.

JK smart battery management

The included JK-PB2A16S-20P inverter BMS is configured for this pack and provides a 200A current rating, 2A active balancing, Bluetooth, CAN, RS485, temperature monitoring, configurable protection and pre-charge functionality.

CAN or RS485 hardware does not guarantee compatibility with every inverter. Confirm the supported protocol, firmware and cable pinout before ordering or commissioning.

Key features

  • 16 matched genuine EVE LF334 334Ah cells
  • 51.52V nominal, 16S1P configuration
  • Approximately 17.21kWh nominal energy
  • JK-PB2A16S-20P 200A smart BMS with 2A active balancing
  • Bluetooth, CAN and RS485 monitoring and communication
  • Busbars, terminal hardware and balance wiring supplied

What’s included

  • 16 × matched EVE LF334 334Ah prismatic cells
  • 1 × JK-PB2A16S-20P 200A JK BMS
  • Inter-cell busbar set
  • Required cell terminal hardware for the supplied cell batch
  • BMS balance-lead harness and associated monitoring wiring

DIY kit notice

This is an unassembled component kit, not a completed or certified drop-in battery. An enclosure, insulated cell restraint, main battery cables, lugs, fuse or circuit breaker, isolator, charger and inverter are not included unless separately stated.

Assembly should only be undertaken by a competent person familiar with high-current DC battery systems. Confirm polarity, use suitable cell restraint and insulation, install DC-rated over-current protection and configure the BMS before commissioning.

Key specifications

Configuration16S1P
Nominal voltage51.52V
Nominal capacity334Ah
Nominal energy17207.68Wh / 17.21kWh
Cell modelEVE LF334
Cell quantity16
Cell chemistryLiFePO4 / lithium iron phosphate
Cell nominal voltage3.22V
Maximum series charge voltage58.4V based on 3.65V per cell; configure equipment appropriately
BMSJK-PB2A16S-20P
BMS current rating200A continuous; completed-system limit may be lower
Active balancingUp to 2A
CommunicationBluetooth, CAN and RS485
Cell standard discharge167A / 0.5C under EVE specified conditions
Cell cycle-life test rating4,000 cycles to 80% SOH at 25°C under EVE specified test conditions
Assembly stateUnassembled DIY component kit

Additional information

Voltage class

51.52V

Configuration

16S1P

Cell model

EVE LF334

Capacity

334Ah

Nominal energy

17.21kWh

BMS model

JK-PB2A16S-20P

Communication

Bluetooth, CAN and RS485

Assembly

DIY component kit


X