24V EVE MB31 314Ah LiFePO4 Battery Kit 8.04kWh with JK BMS

An 8.04kWh DIY battery kit with eight matched genuine EVE MB31 cells and a 200A JK inverter BMS. CAN, RS485, Bluetooth and active balancing suit properly matched 24V solar and inverter systems.

SKU: KIT-EVE-MB31-8S-JKPB200 Category: Tags: , , , , , Brand:

Description

Build your own 25.6V, 314Ah LiFePO4 battery using matched genuine EVE MB31 prismatic cells and a correctly selected JK BMS.

The 8S1P configuration provides approximately 8.04kWh nominal energy for mid-sized off-grid solar, cabin, workshop and backup-power projects.

Genuine EVE cells

Each EVE MB31 cell is rated at 3.2V, 314Ah and 1004.8Wh nominal energy. EVE specifies 8,000 cycles to 70% SOH under EVE specified test conditions.

JK smart battery management

The included JK-PB2A16S-20P inverter BMS is configured for this pack and provides a 200A current rating, 2A active balancing, Bluetooth, CAN, RS485, temperature monitoring, configurable protection and pre-charge functionality.

CAN or RS485 hardware does not guarantee compatibility with every inverter. Confirm the supported protocol, firmware and cable pinout before ordering or commissioning.

Key features

  • 8 matched genuine EVE MB31 314Ah cells
  • 25.6V nominal, 8S1P configuration
  • Approximately 8.04kWh nominal energy
  • JK-PB2A16S-20P 200A smart BMS with 2A active balancing
  • Bluetooth, CAN and RS485 monitoring and communication
  • Busbars, terminal hardware and balance wiring supplied

What’s included

  • 8 × matched EVE MB31 314Ah prismatic cells
  • 1 × JK-PB2A16S-20P 200A JK BMS
  • Inter-cell busbar set
  • Required cell terminal hardware for the supplied cell batch
  • BMS balance-lead harness and associated monitoring wiring

DIY kit notice

This is an unassembled component kit, not a completed or certified drop-in battery. An enclosure, insulated cell restraint, main battery cables, lugs, fuse or circuit breaker, isolator, charger and inverter are not included unless separately stated.

Assembly should only be undertaken by a competent person familiar with high-current DC battery systems. Confirm polarity, use suitable cell restraint and insulation, install DC-rated over-current protection and configure the BMS before commissioning.

Key specifications

Configuration8S1P
Nominal voltage25.6V
Nominal capacity314Ah
Nominal energy8038.4Wh / 8.04kWh
Cell modelEVE MB31
Cell quantity8
Cell chemistryLiFePO4 / lithium iron phosphate
Cell nominal voltage3.2V
Maximum series charge voltage29.2V based on 3.65V per cell; configure equipment appropriately
BMSJK-PB2A16S-20P
BMS current rating200A continuous; completed-system limit may be lower
Active balancingUp to 2A
CommunicationBluetooth, CAN and RS485
Cell standard discharge0.5P under EVE specified conditions
Cell cycle-life test rating8,000 cycles to 70% SOH under EVE specified test conditions
Assembly stateUnassembled DIY component kit

Additional information

Voltage class

25.6V

Configuration

8S1P

Cell model

EVE MB31

Capacity

314Ah

Nominal energy

8.04kWh

BMS model

JK-PB2A16S-20P

Communication

Bluetooth, CAN and RS485

Assembly

DIY component kit


X