24V EVE LF334 334Ah LiFePO4 Battery Kit ~8.6kWh with JK BMS

An 8S, 334Ah DIY battery kit providing approximately 8.60kWh nominal energy. Includes eight matched genuine EVE LF334 cells and a JK 200A inverter BMS with CAN, RS485, Bluetooth and active balancing.

SKU: KIT-EVE-LF334-8S-JKPB200 Category: Tags: , , , , , Brand:

Description

Build your own 25.76V, 334Ah LiFePO4 battery using matched genuine EVE LF334 prismatic cells and a correctly selected JK BMS.

The 8S1P configuration provides approximately 8.60kWh nominal energy for mid-sized off-grid solar, cabin, workshop and backup-power projects.

Genuine EVE cells

Each EVE LF334 cell is rated at 3.22V, 334Ah and 1075.48Wh nominal energy. EVE specifies 4,000 cycles to 80% SOH at 25°C under EVE specified test conditions.

JK smart battery management

The included JK-PB2A16S-20P inverter BMS is configured for this pack and provides a 200A current rating, 2A active balancing, Bluetooth, CAN, RS485, temperature monitoring, configurable protection and pre-charge functionality.

CAN or RS485 hardware does not guarantee compatibility with every inverter. Confirm the supported protocol, firmware and cable pinout before ordering or commissioning.

Key features

  • 8 matched genuine EVE LF334 334Ah cells
  • 25.76V nominal, 8S1P configuration
  • Approximately 8.60kWh nominal energy
  • JK-PB2A16S-20P 200A smart BMS with 2A active balancing
  • Bluetooth, CAN and RS485 monitoring and communication
  • Busbars, terminal hardware and balance wiring supplied

What’s included

  • 8 × matched EVE LF334 334Ah prismatic cells
  • 1 × JK-PB2A16S-20P 200A JK BMS
  • Inter-cell busbar set
  • Required cell terminal hardware for the supplied cell batch
  • BMS balance-lead harness and associated monitoring wiring

DIY kit notice

This is an unassembled component kit, not a completed or certified drop-in battery. An enclosure, insulated cell restraint, main battery cables, lugs, fuse or circuit breaker, isolator, charger and inverter are not included unless separately stated.

Assembly should only be undertaken by a competent person familiar with high-current DC battery systems. Confirm polarity, use suitable cell restraint and insulation, install DC-rated over-current protection and configure the BMS before commissioning.

Key specifications

Configuration8S1P
Nominal voltage25.76V
Nominal capacity334Ah
Nominal energy8603.84Wh / 8.60kWh
Cell modelEVE LF334
Cell quantity8
Cell chemistryLiFePO4 / lithium iron phosphate
Cell nominal voltage3.22V
Maximum series charge voltage29.2V based on 3.65V per cell; configure equipment appropriately
BMSJK-PB2A16S-20P
BMS current rating200A continuous; completed-system limit may be lower
Active balancingUp to 2A
CommunicationBluetooth, CAN and RS485
Cell standard discharge167A / 0.5C under EVE specified conditions
Cell cycle-life test rating4,000 cycles to 80% SOH at 25°C under EVE specified test conditions
Assembly stateUnassembled DIY component kit

Additional information

Voltage class

25.76V

Configuration

8S1P

Cell model

EVE LF334

Capacity

334Ah

Nominal energy

8.60kWh

BMS model

JK-PB2A16S-20P

Communication

Bluetooth, CAN and RS485

Assembly

DIY component kit


X